Barnett Machine Tools, Inc.

Specifications:
Tonnage Capacity: 1500 tons
Overall Length of Bed & Ram: 23’
Distance Between Housings: 20’2”
Bending Capacity: 1”x18’ depending on Die
Stroke Length:18”
Open Height: 30”
Closed Height: 12”
Throat Depth: 20”
Ram Speeds:
Rapid Advance: 56 IPM
Fast Press: 29 IPM
Normal Press: 9 IPM
Normal Return: 21 IPM
Rapid Return: 65 IPM
Motor: 60 HP
Electrics: 3 Phase 60 Cycle

Equipped With:
Adjustable Stroke
Tonnage Control
Level Control System
Pacific Universal Gauges
Bed & Ram Machined & Drilled for Angle Plates
Oil Cooling Unit
New Electrical Controls in 2005
Dual Foot Switches
Dual Palm Button Stands
Light Curtains
New Manuals

SPECIFICATIONS
Capacity: 400 tons
Overall Length of Bed: 14’
Distance Between Housing: 12’ 4 1/2”
Stroke Length: 12”
Open Height: 20”
Closed Height: 8”
Throat Depth: 10”
Ram Speeds: 3 Speeds
57” IPM Rapid Advance
25” IPM Normal Press
55” IPM Return Press
Motor: 40 HP
Electronics: 220/440 Volt; 60 Cycle; 3 Phase

EQUIPPED WITH
Stroke Control
Hydraulic Level Control
Bed and Ram Machined and Drilled for Angle Plates
Upper Section Ram Clamps
Full Set of Angle Plates

*Note: This machine requires a pit at least 35” deep x 137” long x 3-1/2”
wide.

SPECIFICATIONS
Tonnage Capacity: 1000 tons
Overall Length of Bed & Ram: 20’ includes a 4’ horn on each side of ram.

*Machine was originally 12’ overall bed & ram length.
Distance Between Housings: 10’2”
Throat Depth: 16”
Stroke Length: 18”
Open Height: 30”
Closed Height: 12”
Rapid Advance: 9 IPM
Normal Press: 17 IPM
Fast Press: 50 IPM
Normal Return: 48 IPM
Fast Return: 132 IPM

EQUIPPED WITH
Adjustable Stroke Control
Hydraulic Tonnage Control
Level Control System
Electric Foot Switch
10 Micron Filter System

SPECIFICATIONS:
Tonnage Capacity: 750 tons
Overall Length of Bed & Ram: 22’
Distance Between Housings: 18’2”
Bending Capacity: 5/8” x 20’
Throat Depth: 14”
Stroke Length: 12”
Open Height: 22”
Closed Height: 10”
Rapid Advance: 90 IPM
Normal Press: 17 IPM
Fast Press: 50 IPM
Normal Return: 48 IPM
Fast Return: 132 IPM
Motor: 60 HP
Weight (approx): 125,000 lbs.

EQUIPPED WITH:
T-Slotted Bed
2’ Horn on Left Side of Ram
3 Speed Hydraulic Power Unit
Electric Foot Switch Controls
Large Quantity of Tooling

Specifications
Capacity: 300 Tons
Stroke: 8”
Shut Height: 22”
Slide Adjustment: 6”
Bed & Slide Area: 102”LR x 48”FB
Speed: 30 Strokes Per Minute
Windows: 26.75”

Floor Space: 120”LR x 75”FB
Height: 171”
Weight: 38,000# without bolster plate

Equipped With
Air Clutch & Brake
Air Counterbalance
Bolster Plate
Electrics & Controls
30 HP Drive Motor
Flush Floor Design

SPECIFICATIONS
Capacity: 175 tons
14’ of 3/16” material
10’ of 1/4” material
6’ of 3/8” material
Length of Bed & Ram: 14’
Distance Between Side Housings: 12’6”
Ram Stroke: 0-10”
Open Height: 17”
Closed Height: 7”
Ram Speeds
Rapid Advance: 115
Standard High Speed: 272
Normal Press: 58
Anti Back Bend: 13
Rapid Return: 115
Throat Depth: 8”
Main Motor: 30 HP
Electrics: 220/440 V 3 PH 60 Cycle

EQUIPPED WITH
Tonnage Control Valve w/Gauge
3 Speed Ram Control
Micro Ram Tilt
Electric Foot Switch Control
4 Way Die & Misc. Brake Tooling
Flush Floor Machine
Hydraulic Fluid Cooling Unit