Barnett Machine Tools, Inc.

SPECIFICATIONS
Capacity: 10 GA
Max Cutting Length: 10’
Rake of Upper Blade: 3/8”
Number of Holddowns: 16
Backgauge Range: 36”
Strokes Per Min: 60
Dimensions: 14’ x 6’ x 5’
Weight (approx): 13,500 lbs.

SPECIFICATIONS
Capacity: 3/4” x 12’
Full Rake: 1” x 12’
Distance Between Housings: 12’3”
Throat Depth: 18”
Overall Bed Length: 12’
Table Height from Floor: 43”

EQUIPPED WITH
2 Front Operated Support Arms Rake Control
Ball Transfers in Table Inch, Single Stroke
Front Operated Backgauge Backgauge Swing Up Feature
Nitrogen Pull Backs Hyd. Blade Clearance Adjustment

SPECIFICATIONS
Capacity: 1/2” x 12’
Full Rake: 3/4” x 12’
Distance Between Housings: 12’3”
Throat Depth: 18”
Knife Open Height: 1-1/4”
Rake: 5/8”/ft. max.

EQUIPPED WITH
Ball Transfers in Table Inch, Single Stroke
Front Operated Power Backgauge Hydraulic Blade Clearance Adjust
Backgauge Swing Up Feature

EQUIPPED WITH:

36” Front Operated Backgauge

10’ Squaring Arm

Front Support Arms

Electrical Foot Switch

Air Actuated Clutch

Auto Lube System

SPECIFICATIONS

Capacity: 1/4”

Shearing Length: 120”

Distance Between Housings: 10’3”

Rake (IN/FT): 1/4”

Number of Holddowns: 11

Backgauge Range: 36”

Standard Max Strokes per Min: 60

Main Drive Motor: 7.5 HP

Backgauge Motor: .5 HP

Approx Weight: 18,000 lbs.

EQUIPPED WITH
36” Front Operated Power Backgauge

4’ Squaring Arm

Dovetail Slot Full Length of Bed

Variable Stroke Control

Auto Rake Angle & Blade Clearance

Electric Foot Switch
SPECIFICATIONS
Capacity A-36: 3/4”

Width: 10’

Nominal Rake: 1/2”

Max Rake: 3/4”

Number of Holddowns: 11

Holddown Tonnage: 89 tons

Blade Size: 1-1/8” x 5”

Approx Ram Speed IN/SEC

Down: .91

Up: 1.65

Cycles Full Width Cut: 5.2
Cycles Half Width Cut: 10.9

Motor: 50 HP

3 Phase 60 Cycle Electrics